Owners of Boulby Mine in Saltburn fined after electricians suffer severe burns leaving one in coma

04.08.22 boulby mine potash itv news tyne tees
The owners of Boulby Mine, in Saltburn, pleaded guilty to breaching sections of the Health and Safety at Work Act 1974. Credit: ITV News Tyne Tees

The owners of Boulby Mine in Saltburn have been fined after two electricians suffered severe burns in separate incidents.

The mining company were fined £3.6 million, and ordered to pay costs of £185,000 after an investigation by the Health and Safety Executive (HSE).

Cleveland Potash Limited (CPL) own the mine, which extracts organic fertiliser known as Polyhalite. Teesside Crown Court heard that on 3 August 2016 a contract electrician received serious burns from an 11,000-volt electrical system.

He unknowingly had placed a vacuum cleaner nozzle into a live electrical chamber. He had to be airlifted to a Newcastle hospital specialist burns unit, where he was placed in an induced coma for 10 days.

On 12 February 2019, another electrical contractor made contact with a live conductor on a 415-volt electrical system during electrical testing works, and received serious burns. He was in hospital for six days.

The HSE found deficiencies from the owner of the mine in risk assessment, planning of works, and shortfalls in providing warnings about which parts of the electrical systems the two electricians were working on remained live.

Cleveland Potash Limited (CPL) of Boulby Mine, Loftus, Saltburn-by-the-Sea, Cleveland pleaded guilty to breaching Section 2 (1) and two counts of Section 3(1) of the Health and Safety at Work Act 1974.

HSE specialist regulatory principal inspector Paul Bradley said: “These serious electrical incidents were easily preventable.

"CPL should have had a heightened awareness of electrical risks following the first incident in 2016, however failures to apply learnings and to adequately control risks resulted in the 2019 incident.

“Employers should make sure they properly assess and apply effective control measures to minimise risks when working on electrical systems.

"Both these incidents were preventable if long established electrical safety practices been applied.”



Listen to our latest podcasts to find out What You Need To know...